What do you need?
Piece of thick cardboard (box)
adhesive plastic in wood design
sheet silver cardboard
glue
stanley knife
scissors
pencil & ruler
2x2 mm piece of wood
Continued
saw and miter
paint, yellow and blue
black permanent marker
carton roll
flat carton box
couple of nails
pencil stub
pieces wood/slats
The D.I.Y. surprise is simple to make with snazzie's download the tool.
Put the gift in the box and cover the box with a wood pattern adhesive plastic. Now the ground is ready, we make the ruler. Cut a square piece of slat from 40 cm and get a sandpaper saw the long end.
Paint the wood in the yellow-green colour (mix yellow+green).
Use the marker to put the centimeters on the ruler.
Cut an empty kitchen towel carton open lengthwise, roll it up and tape it.
Cover the handle with wood-adhesive plastic and fold the ends shut.
Print the downloads and cut them out. Trace the cuttings on the cardboard and cut them out again.
Fold the hammer head together and glue it firmly on the stem.
Cut out the saw print, trace it as well on carton and cut it out again.
Trace the cardton saw on thick cardboard. Part of a box for instance.
Cut out the thick cardboard saw without teeth with a stanley knife.
Break the thick cardboard saw free on the cuts from the knife.
Cut out the opening in the saw handle.
Place the carton on the cardboard, trace the opening and cut it out.
Strike glue on the thick cardboard saw, strike it onto the edges.
Stick the two saw parts on each other, press them together until they're dry.
Trace the saw handle on the adhesive wood plastic, use the cut out saw.
Trace the cut out opening in the handle on the adhesive plastic.
Cut the plastic handle out as well.
Stick it on the saw and rub it on firmly with a cloth.
Use a knife to cut a cross in the middle of the handle opening.
Fold the adhesive plastic edges around the carton edges.
Glue all the loose parts together on the box and your surprise is ready!