What do you need?
a 9x4 mm slat
a 10x10 mm beam
a pencil and a ruler
a miter box and saw
hobby glue
sanding paper
paint and brushes
What do we have on the agenda for crafting today? It is our plan to make some furniture for the dollhouse, that's what we'll do. We are all into it and we agree that a table and chairs are needed first. Then our bunnies can sit comfortably in their new home.
How to make a wooden table and chairs
Measure and mark 5 slats of 6.5 cm length each.
Saw off the slats for the table top and sand the sawn off edges.
Mark the little beam for the 4 table legs, each 4.5 cm long.
Saw off the legs in the miter box and sand the sawn edges.
Glue the 5 slats together to make the table top.
Put something heavy on top and let the glue dry.
Pipe some glu on the table legs and wait a moment, let the glue dry a tic.
Press the legs firmly onto the table top.
Allow the glue to dry completely again.
De table is finished, but sand where needed.
Put the table aside for now and make the chairs first, so you can paint everything at once later
How to make the chairs
Saw 4 pieces of 4 cm for the seat + 2 for reinforcement.
Saw 2 back legs of 7 cm and 2 front legs of 3 cm each.
Glue the seat together and let it dry well.
Stick the reinforcement on the hind legs.
Allow the glue to dry thoroughly after every time you glue!
Glue the font legs to their reinforcement as well
Allow the glue to dry well again.
When the glue is dry stick the chair together.
Allow the glue to dry comepletely again and then your first furniture is ready to be painted
Choose pretty colours of paint.
Check everything if it's well sanded.
Give your furniture a neat coat of paint.
Finally allow the paint to dry well. :)))
Place the table and chairs in the house
Next time we make the beds ;:))